Home > News > Content
Characteristics And Advantages Of Heat Resistant Conveyor Belt
May 26, 2017

Heat Resistant Conveyor Belt is made of multi-layer rubber canvas or polyester canvas up and down with high temperature rubber, high temperature vulcanization bonded together, and now mainly metallurgy, construction and other industries, Heat Resistant Conveyor Belt with a long life of 2 to 4 Times, good heat resistance;

Heat Resistant Conveyor Belt conditions:

Suitable for conveying 175 degrees of hot coke, cement, slag and hot castings;

Heat Resistant Conveyor Belt is divided into ordinary heat-resistant and strong Heat Resistant Conveyor Belt, ordinary heat-resistant layer for the polyester-cotton canvas (CC56), strong tropical zone strong layer of EP (specifically divided into EP100, EP150, EP200 type, EP250, EP300 type, EP350 type, EP400 type, EP450 type, EP500 type, etc.).

The characteristics and advantages of Heat Resistant Conveyor Belt are as follows:

The use of EPDM rubber for the cover layer, mainly based on the loss of tropical tiles as well as the loss of capacity of the main performance and different heat levels.

The skeleton material adopts the domestic special high temperature canvas, the unique formula design, has solved the ethylene sulfide rubber saturation is high, the adhesive is bad, the low adhesion between the layers of the key issues. With a light body, long life (about 2-4 times), good heat resistance characteristics.

As a kind of conveyor belt, it is widely used in coal, cement, steel, smelting and other industries. It is widely used in coal, cement, steel and smelting industry. It is a kind of conveyor belt with high thermal stability, Used as a solid hot material for transportation, such as sintered ore, pellet ore, cement clinker, drying cement, lime, urea and inorganic fertilizers.

The working environment of the Heat Resistant Conveyor Belt is very harsh. Now, the material temperature of the coal, cement, metallurgy and other industries is very high, reaching 400 ~ 600 e, the process is more than 800 e, so the conveyor material must be resistant high temperature. Today's Heat Resistant Conveyor Belt is divided into T 1, T2, T3 three grades, the corresponding test temperature of 100, 125, 150 e, has obviously can not meet the current requirements. Therefore, we need a comprehensive understanding of the skeletal materials, overlays, mating systems and processing technologies for Heat Resistant Conveyor Belt to develop new long-life heat-resistant conveyments to meet the needs of these industries.