Home > Exhibition > Content
Conveyor belt slippage causes and remedies
Mar 29, 2017

1. counter weight tensioning belt conveyor belt slipping use counter weight tensioning device in belt slipping can add either again to resolve, add up to the belt does not slip. But you should not add too much so as not to put unnecessary tension on the belt and reduce the service life of the belt.

2. screw tensioning or skidding of Hydraulic tensioning belt using screw tensioning or when there are skid Hydraulic tensioning of the belt conveyor tension stroke can be adjusted to increase the tension. However, sometimes not enough take-up stroke, conveyor belt a permanent deformation belt can then be cut off for a while, repeat the curing.

3. use conveyor belt tensioning is required when the trip is longer, when travel is not sufficient available curing or increase tension travel solution.